======= Kit installation =======


======= Supported items =======

Uppercase parameters denote variable items and must be replaced by actual values or omitted.

List of items:

| ^ Version ^Description ^
^agent.hostname|1.4| currently, same as system.hostname|
^ agent.ping|1.0|Ping from the server |
^agent.version| 1.0| Version of zabbix_agent|
^kernel.numlocks|1.4|Current number of locks|
^ kernel.maxproc| 1.0| Maximum number of processes on the server (ever)|
^logical.exists[LOGNAME, TABLENAME]|1.4|Check if LOGNAME exists in table TABLENAME default LNM$FILE_DEV|
^ logical.value[LOGNAME, TABLENAME]|1.4| Value of LOGNAME in table TABLENAME default LNM$FILE_DEV.\\ Returns an empty string if LOGNAME does not exist|
^net.service.exists[HOST, PORT]|1.4| Check if the host HOST on port PORT is accessible from the agent.\\ Returns 1 if ok, 0 if not |
^ system.hostname| 1.0| currently returns SCSNODENAME|
^system.uname| 1.0| Host information|
^ system.boottime|1.0|Boot time|
^ system.uptime| 1.0| Host Uptime (in seconds)|
^system.localtime|1.0|Host local time|
^ system.bufio| 1.0| Host BUFIO|
^system.dirio|1.0|Host DIRIO|
^ system.ijoblim| 1.5| Limit for interactive jobs|
^system.cpu.load[,AVG]|1.0| Total CPU load AVG in (avg1, avg5, avg15)|
^ system.mem[memsize]|1.2|Memory size (in KB)|
^system.mem[page_size]| 1.2| Page size (in Bytes)|
^system.mem[total_pages]|1.2|Total number of pages on the system|
^ system.mem[contig_gblpages]| 1.4| Current number of contiguous global pages|
^system.mem[free_gblpages]|1.2|Free global pages|
^ system.mem[used_gblpagcnt]| 1.2| used global pages|
^system.mem[used_gblpagmax]|1.2| Max number of used global pages|
^ system.mem[free_gblsects]| 1.2|Free global sections|
^system.mem[pagefile_page]| 1.2| Number of pages in the page files|
^ system.mem[pagefile_free]|1.2|Free pages in the page files|
^ system.mem[swapfile_page]| 1.2| Number of pages in the swap files|
^system.mem[swapfile_free]|1.2|Free pages in the swap files|
^system.getsyi[CODE]|1.4|see following table|
^ net.if.in[MY_INTERFACE, bytes]| 1.0| Incoming traffic on interface MY_INTERFACE|
^net.if.out[MY_INTERFACE, bytes]|1.0|Outgoing traffic on interface MY_INTERFACE|
^ net.if.up[MY_INTERFACE]| 1.4|interface MY_INTERFACE is up|
^proc.num[,,run]|1.0| Number of running processes (com+cur)|
^ proc.num[,,max]|1.0|Max number of processes (idem kernel.maxproc)|
^proc.num[,,int]| 1.0| Number of interactive processes|
^proc.num[,,batch]|1.0|Number of batch processes|
^ proc.num[,,net]| 1.0| Number of network processes|
^proc.num[,,outswapped]|1.2|Number of out swapped processes (como + hibo + lefo + suspo)|
^ proc.num[,,MODE]| 1.0| With MODE in (com, como, cur, hib, hibo, cef, lef, lefo, mwait, pfw, susp, suspo) any other value or no value for MODE.\\ Will return total number of processes|
^proc_info[PROCESS_NAME, exists, NODENAME, USERNAME, IMAGNAME]|1.0| Number of processes corresponding to the request. PROCESS_NAME (case blind) can contain wildcards. NODENAME : the node in the cluster where we try to find the process.\\  Can be * for cluster-wide lookup. Local node only if omitted. USERNAME : username that is running the process. Any username if omitted|
^ proc_info[PROCESS_NAME, imagname, NODENAME, USERNAME, IMAGNAME]| 1.2| image name of the specified process| 
^ proc_info[PROCESS_NAME,nodename, NODENAME, USERNAME, IMAGNAME]| 1.2| node name of the specified process|
^ proc_info[PROCESS_NAME,username, NODENAME, USERNAME, IMAGNAME]| 1.2| user name of the specified process|
^proc_info[PROCESS_NAME, pid, NODENAME, USERNAME, IAMGNAME]|1.2| pid of the specified process|
^proc_info[PROCESS_NAME, prcnam, NODENAME, USERNAME, IMAGNAME]|1.2| processname of the specified process|
^ proc_info[PROCESS_NAME, virtpeak, NODENAME, USERNAME, IMAGNAME]| 1.2| virtpeak in KB|
^proc_info[PROCESS_NAME, wsauth, NODENAME, USERNAME, IMAGNAME]|1.2| wsauth in KB|
^ proc_info[PROCESS_NAME, wsauthext, NODENAME, USERNAME, IMAGNAME]| 1.2| wsauthext in KB|
^proc_info[PROCESS_NAME, wsextent, NODENAME, USERNAME,IMAGNAME]|1.2| wsextent in KB|
^ proc_info[PROCESS_NAME, wspeak, NODENAME, USERNAME,IMAGNAME]| 1.2| wspeak in KB|
^proc_info[PROCESS_NAME, wsquota, NODENAME, USERNAME,IMAGNAME]|1.2| wsquota in KB|
^ proc_info[PROCESS_NAME, wssize, NODENAME, USERNAME, IMAGNAME]| 1.2| wssize in KB|
^proc_info[PROCESS_NAME, biocnt, NODENAME, USERNAME,IMAGNAME]|1.2.2| biocnt|
^proc_info[PROCESS_NAME, biolm, NODENAME, USERNAME,IMAGNAME]|1.2.2| biolm|
^proc_info[PROCESS_NAME, diocnt, NODENAME, USERNAME,IMAGNAME]|1.2.2| diocnt|
^proc_info[PROCESS_NAME, diolm, NODENAME, USERNAME,IMAGNAME]|1.2.2| diolm|
^ proc_info[PROCESS_NAME, bytcnt,NODENAME, USERNAME,IMAGNAME]| 1.2.2| bytcnt|
^ proc_info[PROCESS_NAME, bytlm, NODENAME, USERNAME,IMAGNAME]|1.2.2| bytlm|
^proc_info[PROCESS_NAME, enqcnt, NODENAME, USERNAME,IMAGNAME]|1.2.2| enqcnt|
^ proc_info[PROCESS_NAME, enqlm, NODENAME, USERNAME]| 1.2.2| enqlm|
^proc_info[PROCESS_NAME, filcnt, NODENAME, USERNAME]|1.2.2| filcnt|
^proc_info[PROCESS_NAME, fillm, NODENAME, USERNAME]|1.2.2| fillm |
^proc_info[PROCESS_NAME, prccnt, NODENAME, USERNAME]|1.2.2| prccnt|
^ proc_info[PROCESS_NAME, prclm, NODENAME, USERNAME]| 1.2.2| prclm|
^proc_info[PROCESS_NAME, tqcnt, NODENAME, USERNAME]| 1.2.2| tqcnt|
^ proc_info[PROCESS_NAME, tqlm, NODENAME, USERNAME]| 1.2.2| tqlm|
^ device.errcnt[DEVICE]|1.2| Error count for the DEVICE|
^vfs.fs.size[DISK,free]| 1.0|Free space on disk DISK|
^ vfs.fs.size[DISK,total]|1.0| Total capacity of disk DISK|
^vfs.fs.shdw[DISK,device_count]| 1.1| Returns the total number of devices in the virtual unit, including devices being added as copy targets |
^vfs.fs.shdw[DISK,mbr_count]| 1.1|Returns the number of full source members in the virtual unit. Devices added as copy targets are not full source members. |
^ vfs.file.exists[FILENAME]|1.0| does FILENAME exists (can contain wildcards)|
^ vfs.file.exists[FILENAME,number]|1.0| number of existing FILENAME (can contain wildcards)|
^vfs.file.size[FILENAME]| 1.0|size of FILENAME (or sum of sizes if multiple files due to wildcards)|
^vfs.file.size[FILENAME,allocated]| 1.0|allocated size of FILENAME (or sum...)|
^ queman.queue[QUEUE_NAME,on]|1.2| node_name where QUEUE_NAME is running|
^queman.queue[QUEUE_NAME,jobs,JOB_STATUS]| 1.2| Total number of jobs if JOB_STATUS is empty. \\ Number of jobs with this status if JOB_STATUS in (executing, pending, holding, retained, retained_error, timed_release) |
^queman.queue[QUEUE_NAME,job_limit]| 1.2|job_limit for this queue|
^ queman.queue[QUEUE_NAME,description]|1.2| description of this queue|
^ queman.queue[QUEUE_NAME,type]|1.2| type of the queue (BATCH, GENERIC, TERMINAL, PRINTER, SERVER)|
^ queman.queue[QUEUE_NAME,status]|1.2|Status of queue QUEUE_NAME (IDLE, PAUSED, PAUSING, RESUMING,STALLED, STARTING, STOPPED, STOPPING, UNAVAILABLE, CLOSED, BUSY,UNDEFINED, AVAILABLE, DISABLED, AUTOSTART_PENDING, STOP_PENDING|
^ queman.job[JOB_NAME,status,QUEUE_NAME]|1.2| Status of job JOB_NAME.The status is in (NO_SUCH_JOB, EXECUTING, STARTING, STALLED, SUSPENDED, ABORTING, PENDING, TIMED_RELEASE, HOLDING, RETAINED).\\  If there are multiple jobs named JOB_NAME, the status is the first status in this list for which there is at least a job. \\ Regarding QUEUE_NAME (same behaviour for all queman.job items). \\ If QUEUE_NAME is empty : look for the jobs in all the queues. \\ If QUEUE_NAME in (batch, symbiont, printer, server, terminal), look for jobs in queues of this kind. \\ If something else : it is considered as the name of the queue(s) where to look at for jobs.\\ Can have wildcards.| 
^queman.job[JOB_NAME,count,QUEUE_NAME]|1.2|Total number of jobs named JOB_NAME|
^queman.job[JOB_NAME,executing,QUEUE_NAME]|1.2|Total number of executing jobs named JOB_NAME|
^queman.job[JOB_NAME,holding,QUEUE_NAME]|1.2|Total number of holding jobs named JOB_NAME| 
^queman.job[JOB_NAME,pending,QUEUE_NAME]|1.2|Total number of pending jobs maned JOB_NAME|
^queman.job[JOB_NAME,retained,QUEUE_NAME]|1.2|Total number of retained jobs named JOB_NAME|
^queman.job[JOB_NAME,stalled,QUEUE_NAME]|1.2|Total number of stalled jobs names JOB_NAME|
^queman.job[JOB_NAME,starting,QUEUE_NAME]|1.2|Total number of starting jobs named JOB_NAME|
^queman.job[JOB_NAME,suspended,QUEUE_NAME]|1.2|Total number of suspended jobs named JOB_NAME|
^queman.job[JOB_NAME,timed_release,QUEUE_NAME]|1.2|Total number of timed released jobs named JOB_NAME|
^queman.job[JOB_NAME,aborting,QUEUE_NAME]|1.2|Total number of abortingjobs named JOB_NAME|
^queman.manager[status,QUEUE_MANAGER]|1.2|Status of queue manager (FAILOVER, RUNNING, START_PENDING, STARTING,STOPPING, STOPPED). If QUEUE_MANAGER is empty, it returns a result for the default queue manager. \\ Else, it gets result for the specified queue manager. QUEUE_MANAGER is the name of the queue manager\\ (see : '$ show queue/manager')|
^queman.manager[node_name,QUEUE_MANAGER]|1.2|node_name where QUEUE_MANAGER is running|
^ queman.manager[nodes,QUEUE_MANAGER]| 1.2| list of node names where QUEUE_MANAGER can run status of job JOB_NAME.|

List of **system.getsyi** items
^ Item Name ^
|GBLSECTIONS |
|MAXPROCESSCNT |
|MULTIPROCESSING |
|SMP_SANITY_CNT |
|SMP_SPINWAIT |
|SMP_LNGSPINWAIT |
|PROCSECTCNT |
|MINWSCNT |
|SYSMWCNT |
|KSTACKPAGES |
|WSMAX |
|NPAGEDYN |
|NPAGEVIR |
|PAGEDYN |
|CHANNELCNT |
|MPW_WRTCLUSTER |
|MPW_HILIMIT |
|MPW_LOLIMIT |
|MPW_IOLIMIT |
|FILE_CACHE |
|S2_SIZE |
|ERRORLOGBUFFERS |
|USER3 |
|USER4 |
|FREELIM |
|LOCKIDTBL |
|RESHASHTBL |
|SCSBUFFCNT |
|SCSRESPCNT |
|SCSMAXDG |
|SCSMAXMSG |
|SCSSYSTEMID |
|SCSSYSTEMIDH |
|SCSNODE |
|PASTDGBUF |
|SMCI_PORTS |
|TIMEPROMPTWAIT |
|LNMSHASHTBL |
|LNMPHASHTBL |
|ACP_XQP_RES |
|ACP_REBLDSYSD |
|SSI_ENABLE |
|TTY_SCANDELTA |
|TTY_DIALTYPE |
|TTY_SPEED |
|TTY_RSPEED |
|TTY_PARITY |
|TTY_BUF |
|TTY_DEFCHAR |
|TTY_DEFCHAR2 |
|TTY_DEFCHAR3 |
|TTY_TYPAHDSZ |
|TTY_ALTYPAHD |
|TTY_ALTALARM |
|TTY_CLASSNAME |
|TTY_SILOTIME |
|RMS_FILEPROT |
|VAXCLUSTER |
|EXPECTED_VOTES |
|VOTES |
|DISK_QUORUM |
|QDSKVOTES |
|QDSKINTERVAL |
|ALLOCLASS |
|LOCKDIRWT |
|CLUSTER_CREDITS |
|GALAXY |
|GLX_INST_TMO |
|NISCS_CONV_BOOT |
|NISCS_LOAD_PEA0 |
|MSCP_LOAD |
|TMSCP_LOAD |
|MSCP_SERVE_ALL |
|TMSCP_SERVE_ALL |
|MSCP_BUFFER |
|MSCP_CREDITS |
|STARTUP_P1 |
|STARTUP_P2 |
|STARTUP_P3 |
|STARTUP_P4 |
|STARTUP_P5 |
|STARTUP_P6 |
|STARTUP_P7 |
|STARTUP_P8 |
|DEVICE_NAMING |
|ERLBUFFERPAGES |
|TAPE_ALLOCLASS |
|SHADOWING |
|SHADOW_SYS_UNIT |
|GH_EXEC_CODE |
|GH_EXEC_DATA |
|GH_RES_CODE |
|GH_RES_DATA |
|GH_RSRVPGCNT |
|NISCS_MAX_PKTSZ |
|SECURITY_POLICY |
|WLKSYSDSK |
|IMGREG_PAGES |
|SHADOW_ENABLE |
|SHADOW_SITE_ID |
|SYSTEM_CHECK |
|DR_UNIT_BASE |
|NPAG_BAP_MIN |
|NPAG_BAP_MAX |
|NPAG_BAP_MIN_PA |
|NPAG_BAP_MAX_PA |
|NPAG_RING_SIZE |
|GLX_SHM_REG |
|RAD_SUPPORT |
|NPAGECALC |
|SHADOW_MAX_UNIT |
|NPAGERAD |
|MPW_STACKPAGES |
|DEFUID |
|DEFGID |
|VHPT_SIZE |
|FCLAN_FRAME |
|ERLBUFFERPAG_S2 |
|ERRORLOGBUFF_S2 |
|SMP_CPU_BITMAP |
|BALSETCNT |
|TTY_DMASIZE |
|SHADOW_SYS_DISK |
|SHADOW_MAX_COPY |
|LGI_CALLOUTS |
|NET_CALLOUTS |
|DBGTK_SCRATCH |
|SHADOW_SYS_TMO |
|SHADOW_SYS_WAIT |
|CWCREPRC_ENABLE |
|PFCDEFAULT |
|GBLPAGES |
|GBLPAGFIL |
|QUANTUM |
|MPW_THRESH |
|MPW_WAITLIMIT |
|MPW_LOWAITLIMIT |
|PFRATL |
|PFRATH |
|WSINC |
|WSDEC |
|AWSMIN |
|AWSTIME |
|SWPOUTPGCNT |
|LONGWAIT |
|DORMANTWAIT |
|TIMVCFAIL |
|DUMPSTYLE |
|USERD1 |
|USERD2 |
|EXTRACPU |
|MAXSYSGROUP |
|MVTIMEOUT |
|TAPE_MVTIMEOUT |
|MAXBUF |
|DEFMBXBUFQUO |
|DEFMBXMXMSG |
|FREEGOAL |
|GROWLIM |
|BORROWLIM |
|CLISYMTBL |
|DEADLOCK_WAIT |
|SCSFLOWCUSH |
|PRCPOLINTERVAL |
|PASTIMOUT |
|PANUMPOLL |
|PAMAXPORT |
|PAPOLLINTERVAL |
|PAPOOLINTERVAL |
|PASANITY |
|PANOPOLL |
|SMCI_FLAGS |
|BUGREBOOT |
|CRDENABLE |
|DUMPBUG |
|BUGCHECKFATAL |
|ACP_MULTIPLE |
|SETTIME |
|ACP_SHARE |
|UAFALTERNATE |
|SAVEDUMP |
|POWEROFF |
|CLASS_PROT |
|LGI_BRK_TERM |
|LGI_BRK_DISUSER |
|LOAD_PWD_POLICY |
|MOUNTMSG |
|DISMOUMSG |
|TTY_TIMEOUT |
|TTY_AUTOCHAR |
|RMS_DFMBC |
|RMS_DFMBFSDK |
|RMS_DFMBFSMT |
|RMS_DFMBFSUR |
|RMS_DFMBFREL |
|RMS_DFMBFIDX |
|RMS_CONPOLICY |
|RMS_PROLOGUE |
|RMS_EXTEND_SIZE |
|MAXBOBMEM |
|RMS_DFNBC |
|RMS_SEQFILE_WBH |
|PQL_DASTLM |
|PQL_MASTLM |
|PQL_DBIOLM |
|PQL_MBIOLM |
|PQL_DBYTLM |
|PQL_MBYTLM |
|PQL_DCPULM |
|PQL_MCPULM |
|PQL_DDIOLM |
|PQL_MDIOLM |
|PQL_DFILLM |
|PQL_MFILLM |
|PQL_DPGFLQUOTA |
|PQL_MPGFLQUOTA |
|PQL_DPRCLM |
|PQL_MPRCLM |
|PQL_DTQELM |
|PQL_MTQELM |
|PQL_DWSDEFAULT |
|PQL_MWSDEFAULT |
|PQL_DWSQUOTA |
|PQL_MWSQUOTA |
|PQL_DWSEXTENT |
|PQL_MWSEXTENT |
|PQL_DENQLM |
|PQL_MENQLM |
|PQL_DJTQUOTA |
|PQL_MJTQUOTA |
|ACP_MAPCACHE |
|ACP_HDRCACHE |
|ACP_DIRCACHE |
|ACP_DINDXCACHE |
|ACP_WORKSET |
|ACP_FIDCACHE |
|ACP_EXTCACHE |
|ACP_EXTLIMIT |
|ACP_QUOCACHE |
|ACP_SYSACC |
|ACP_MAXREAD |
|ACP_WINDOW |
|ACP_WRITEBACK |
|ACP_DATACHECK |
|ACP_BASEPRIO |
|ACP_SWAPFLGS |
|DEFPRI |
|IJOBLIM |
|RJOBLIM |
|DEFQUEPRI |
|MAXQUEPRI |
|LGI_PWD_TMO |
|LGI_RETRY_LIM |
|LGI_RETRY_TMO |
|LGI_BRK_LIM |
|LGI_BRK_TMO |
|LGI_HID_TIM |
|RECNXINTERVAL |
|NISCS_PORT_SERV |
|MSCP_CMD_TMO |
|MMG_CTLFLAGS |
|WINDOW_SYSTEM |
|VCC_MAX_CACHE |
|VCC_MAX_IO_SIZE |
|VCC_MAX_LOCKS |
|VCC_READAHEAD |
|VCC_WRITEBEHIND |
|VCC_WRITE_DELAY |
|IEEE_ADDRESS |
|IEEE_ADDRESSH |
|SHADOW_MBR_TMO |
|ZERO_LIST_HI |
|LAN_FLAGS |
|NPAG_INTERVAL |
|NPAG_GENTLE |
|NPAG_AGGRESSIVE |
|ARB_SUPPORT |
|LCKMGR_MODE |
|LCKMGR_CPUID |
|WBM_MSG_INT |
|WBM_MSG_UPPER |
|WBM_MSG_LOWER |
|WBM_OPCOM_LVL |
|AUTO_DLIGHT_SAV |
|DELPRC_EXIT |
|SHADOW_REC_DLY |
|SHADOW_HBMM_RTC |
|MULTITHREAD |
|SHADOW_PSM_RDLY |
|EXECSTACKPAGES |
|GB_CACHEALLMAX |
|GB_DEFPERCENT |
|CPU_POWER_MGMT |
|CPU_POWER_THRSH |
|IO_PRCPU_BITMAP |
|LOCKRMWT |
|SSIO_SYNC_INTVL |
|SCH_SOFT_OFFLD |
|SCH_HARD_OFFLD |


List of discovery items
 
| ^ Version ^Description ^
^ vms.disks.discovery [TYPE]| 1.0 | obsolete, type in (shad,noshad) default noshad |
^ vms.if.discovery | 1.0 | obsolete |
^ queman.que.discovery []| 1.0 | obsolete |
^ vms.generic.discovery [FILENAME]| 1.4 | loads json file : zabbix_local_dir:FILENAME.json  |


Template files **Template_OS_OpenVMS.xml** and **Template_OS_OpenVMS_discovery.xml** are provided. 


======= How to use discovery rules and items prototypes =======

The item **vms.generic.discovery**  allows to load a json file from the OpenVMS system to the zabbix server, using discovery rules, which can contain prototype items, triggers , graphs...

====Example for the network devices====
item\\  
**vms.generic.discovery[zabbix_if_discovery]**

Content of the file\\ 
**zabbix_local_dir:zabbix_if_discovery.json**


<code>
{
"data":[
{"(#INAME}":"EIA0:"},
{"(#INAME}":"EwA0:"}]
)
</code>

Example of item prototypes

{{:t1.png?1600|}}


Example of trigger prototypes
{{:trigger.png?1600|}}